GEOATON Bidet Toilet Seat with Self Cleaning Dual Nozzles Separated Rear & Feminine Cleaning 1.SELF-CLEANING:Before and after each use, the nozzle will conduct a strict self-cleaning, away from stains, more safe and healthy, and achieve the best. 2.SEPARATE DUAL NOZZLES:Front and rear cleaning nozzle design, 4-hole soft cleaning nozzle specially designed for women, to avoid cross contamination, prevent bacterial infection, and provide refreshing cleaning and nursing experience. GEOATON is a high-end kitchen and bathroom hardware manufacturer, dedicated to creating intelligent, practical and simple kitchen and bathroom research and development production and marketing complex. Non-Electric Bidet Toilet Seat EASY INSTALLATION AND SAFER No electricity or frustrating plumbing required. The bidet seat fits standard toilet bowls and can be installed all by yourself in just 15 minutes. All accessories included and no additional purchase required Suitable for all ages, including children and the elders, and beloved ones who need to be specially taken care of. Slow Closing And Comfortable Toilet Seat The cover plates of bidet are equipped with damping buffer effect to reduce noise.Even at night,The seat is also contoured to provide the most comfortable bathroom experience. Cleaning Nozzles Separated front & rear cleaning nozzlesThe water volume adjusts easily with a simple turn on the leverFeeling refreshed with the most hygienic and soothing experience you’ve ever had Dual Cleaning Functions Easy to operate with one-lever control for kids, elderly and pregnant ladiesDual functions including soft front spray & wide rear cleaningFlexibly adjustable water pressure from soft to strong Simple installation 1.Put the plug nuts into the fastening hole on bowl.2.place the fixing plate, washers and bolts onto the bowl in the opening of template. 3.Place the template onto the bowl matching profiles between bidet seat and bowl.4.Insert the bidet seat onto the fixing plate and push it to the end. It is fixed while you hear a "click". 5.Make sure that flat seal kept in the flexible hose and the connect it to the T shape joint.6.Connect the flexible hose onto the T shape joint.Installation finish and test leak or not. NOTE: 1.If the nozzle cannot be extended , please check whether there is any impurity blockage at the hose interface.2.The supply water pressure limit is from 0.07 to 0.8MPa . If the water supply pressure is lower than 0.07MPa(such as the water tank on rooftop), please refer to Figure 3 to remove the regulator.3.The product can be connected to warm water supply. But the warm water temperature must be within 40℃.