Cargo mat fit the cargo area properly. You will need to cut out the appropriate squares to allow the straps for pulling the seats up if your vehicle has them. Also if you need to use the car seat tether attachment, you will need to cut those out as well. I found that carefully and slowly using a razor utility knife from the back side and cutting near parallel to the mat provided the cleanest cut, The lower strap hole was slightly off alignment for my vehicle but works just fine allowing access to the Velcro pad. There is not a cutout for the center handle to the spare tire area but it is easy to grab the left or right corner to lift the mat in order to get to the spare tire/storage area below.When installing, I suggest cutting the plastic bag it was packed in and laying it in the cargo area before setting the mat down. This will allow you to properly position the rear part properly without the Velcro strips sticking to the carpet material before it is aligned. While holding the back part in place, slowly pull the plastic bag towards the front of the vehicle allowing the Velcro to grab the carpet. Next, align one seat back cover over a seat and slowly pull the plastic from under that portion and repeat for the second seat back.